Technical data

Manual VIPA System 200V Chapter 7 Analog output modules
HB97E - SM - Rev. 09/19 7-21
Electrical data VIPA 232-1BD51
Number of output channels 4
Length of cable: shielded 200m
Supply voltage DC 24V
- Inverse polarity protection yes
Potential separation
- between channels / backplane bus yes
- between channel / power supply of
the electronic yes
- between the channels no
- between channels/load voltage L+ yes
Isolation proofed with DC 500V
Current consumption
- via backplane bus 75mA
- from load voltage L+ (without load) 60mA
Power dissipation of the module 1.8W
Analog value calculation output channels
Resolution (incl. Overdrive region)
±10V, ±20mA 11bit + sign
4 ... 20mA, 1 ... 5V 10bit
0 ... 10V, 0 ... 20mA 11bit
Conversion time (per channel)
450µs
Settling time
- impedance load 0.05ms
- capacitive load 0.5ms
- inductive load 0.1ms
Suppression of interference, limits of error output channels
Crosstalk between the outputs > 40dB
Operational limit (in the entire temperature range, referring to input range)
Measuring range Tolerance
Voltage output 1 … 5V ±0.8%
1)
0 … 10V ±0.6%
1)
±10V ±0.4%
1)
Current output 4 … 20mA ±0.8%
2)
0 … 20mA ±0.6%
2)
±20mA ±0.3%
2)
Basic error limit (during temperature is 25°C, referring to input range)
Measuring range Tolerance
Voltage output 1 … 5V ±0.4%
1)
0 … 10V ±0.3%
1)
±10V ±0.2%
1)
Current output 4 … 20mA ±0.5%
2)
0 … 20mA ±0.4%
2)
±20mA ±0.2%
2)
Temperature error
(with reference to the output range)
±0.01%/K
continued ...
Technical data