Technical data

Manual VIPA System 200V Chapter 6 Analog input modules
HB97E - SM - Rev. 09/19 6-43
Measured
value in V
Units
Binary measured
value
T E Ü Range
12.5 2560 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 overdrive region
10.005 2049 0 1 0 0 0 0 0 0 0 0 0 0 1 0 0 0
10.0 2048 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 nominal range
5 1024 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0
2.5 512 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0
1.25 256 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0
0.625 128 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0
0.005 1 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0.005 -1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0
-0.625 -128 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0
-1.25 -256 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0
-2.5 -512 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
-5 -1024 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0
-10.0 -2048 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-10.005 -2049 1 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0 Underdrive region
-12 -2560 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0
Electrical data VIPA 231-1BD70
Number of inputs 4 individually isolated
Voltage measuring range
±10V
Input filter time delay 3ms
Input resistance
83.5kΩ
Power supply 5V via backplane bus
Current consumption 280mA via backplane bus
Isolation yes, every channel separately,
isolation tested at 500Vrms
Programming specifications
Input data 8byte (1 word per channel)
Output data -
Parameter data -
Diagnostic data -
Process alarm data -
Dimensions and weight
Dimensions (WxHxD) 25.4x76x88mm
Weight 120g
Numeric notation
in Siemens
S5 format
Technical data