Technical data

Manual VIPA System 200V Chapter 4 Digital output modules
HB97E - SM - Rev. 09/19 4-45
222-1FD10 - DO 4xSolid State
DO 4xSolid State VIPA 222-1FD10
The digital output module accepts binary control signals from the central
bus system and controls the connected loads at the process level via solid-
state relay outputs. The module derives power from the backplane bus.
The module has 4 separate channels that operate as switches and display
the status by means of LEDs. Active loads must be supplied with external
power.
• 4 isolated solid-state outputs
• Power supply via backplane bus
• External load voltage AC 230V or DC 400V
• Max. output current per channel 0.5A (AC 230V / DC 400V)
• Suitable for motors, lamps, magnetic valves and contactors
• Active channel indication by means of an LED
1
2
3
4
[1]
[2]
[3]
[4]
Label for module description
Label for the bit address with
description
LED status indicator
Edge connector
LED
.0... .3
Description
LEDs (green)
Q+0.0 to Q+0.3
when an output is active
the respective LED is
turned on
DO 4xSolid State
SM 222
.0
.1
.2
.3
VIPA 222-1FD10
X2
34
1
2
3
4
5
6
7
8
9
I0
Pin
1
2+3
4+5
6+7
8+9
10
Assignment
not connected
Output Q+0.0
Output Q+0.1
Output Q+0.2
Output Q+0.3
not connected
Order data
Description
Properties
Construction
Status indicator
pin assignment