Technical data

Manual VIPA System 200V Chapter 4 Digital output modules
HB97E - SM - Rev. 09/19 4-43
222-1FF00 - DO 8xSolid State COM
DO 8xSolid State COM VIPA 222-1FF00
The digital output module accepts binary control signals from the central
bus system and controls the connected loads at the process level via solid-
state relay outputs. The module derives power from the backplane bus.
The module has 8 channels that are interconnected via the load voltage
that act as switches and display the status by means of LEDs. Solid-state
relays change state when the load voltage passes through zero (AC).
• 8 solid-state outputs with active channel indication by means of a LED
• Extended service life due to the fact that the load voltage (provided this
is AC) is switched when it passes through zero
• External load voltage AC 230V or DC 400V
• Max. output current per channel 0.5A (AC 230V / DC 400V)
• Suitable for small motors, lamps, magnetic valves and contactors
1
2
3
4
[1]
[2]
[3]
[4]
Label for module description
Label for the bit address with
description
LED status indicator
Edge connector
LED
.0 ... .7
Description
LEDs (green)
Q+0.0 to Q+0.7
when an output is active
the respective LED is
turned on
DO 8xSolid State
SM 222
.0
.1
.2
.3
.4
.5
.6
.7
VIPA 222-1FF00
X3
45
1
2
3
4
5
6
7
8
9
I0
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
Supply voltage
Output Q+0.0
Output Q+0.1
Output Q+0.2
Output Q+0.3
Output Q+0.4
Output Q+0.5
Output Q+0.6
Output Q+0.7
Supply voltage
Order data
Description
Properties
Construction
Status indicator
pin assignment