Technical data

Manual VIPA System 200V Chapter 4 Digital output modules
HB97E - SM - Rev. 09/19 4-39
222-1HD10 - DO 4xRelay
DO 4xRelay VIPA 222-1HD10
The digital output module accepts binary control signals from the central
bus system and controls the connected loads at the process level via relay
outputs. The module derives power from the backplane bus. The module
has 4 isolated channels that operate as switches and the status of each
channel is displayed by means of a LED. Power required by active loads
must be supplied externally.
• 4 isolated relay outputs
• Power supply via backplane bus
• External load voltage AC 230V / DC 30V (may be mixed)
• Max. output current per channel 5A (AC 230V / DC 30V)
• Suitable for motors, lamps, magnetic valves and DC contactors
• Active channel indication by means of an LED
1
2
3
4
[1]
[2]
[3]
[4]
Label for module description
Label for the bit address with
description
LED status indicator
Edge connector
LED
.0... .3
Description
LEDs (green)
Q+0.0 to Q+0.3
when an output is active
the respective LED is
turned on
DO 4xRELAIS
SM 222
.0
.1
.2
.3
VIPA 222-1HD10
X2
34
1
2
3
4
5
6
7
8
9
I0
Pin
1
2+3
4+5
6+7
8+9
10
Assignment
not connected
Relay output Q+0.0
Relay output Q+0.1
Relay output Q+0.2
Relay output Q+0.3
not connected
Order data
Description
Properties
Construction
Status indicator
pin assignment