Technical data

Manual VIPA System 200V Chapter 4 Digital output modules
HB97E - SM - Rev. 09/19 4-37
222-1HF00 - DO 8xRelay COM
DO 8xRelay COM VIPA 222-1HF00
The digital output module accepts binary control signals from the central
bus system and controls the connected loads at the process level via relay
outputs. The module derives power from the backplane bus. The load
voltage must be connected to terminal 1. When the total current exceeds
8A you have to balance the load current between terminals 1 and 10. The
module has 8 channels and the status of each channel is displayed by
means of an LED.
• 8 relay outputs
• Power supply via backplane bus
• External load voltage AC 230V / DC 30V
• Output current per channel 5A (AC 230V / DC 30V)
• Suitable for motors, lamps, magnetic valves and DC contactors
• Active channel indication by means of LED
1
2
3
4
[1]
[2]
[3]
[4]
Label for module description
Label for the bit address with
description
LED status indicator
Edge connector
LED
.0... .7
Description
LEDs (green)
Q+0.0 to Q+0.7
when an output is active
the respective LED is
turned on
DO 8xRELAIS
SM 222
.0
.1
.2
.3
.4
.5
.6
.7
VIPA 222-1HF00
X2
34
1
2
3
4
5
6
7
8
9
I0
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
Supply voltage L
Relay output Q+0.0
Relay output Q+0.1
Relay output Q+0.2
Relay output Q+0.3
Relay output Q+0.4
Relay output Q+0.5
Relay output Q+0.6
Relay output Q+0.7
Supply voltage L
Order data
Description
Properties
Construction
Status indicator
pin assignment