Technical data

Chapter 4 Digital output modules Manual VIPA System 200V
4-28 HB97E - SM - Rev. 09/19
222-1DB00 - DO 2xAC 100...230V 2A
DO 2xAC 100...230V 2A VIPA 222-1DB00
The digital output module controls the power drain of the outputs by using
the settings of the user program. The module provides 2 individual trigger
able channels and requires an AC 100...230V supply via the connector
located on the front. The maximum load current per output is 2A.
The module has a configurable software dimmer function to avoid a step
change of the load current. The software dimmer function transforms a
step change of the load current into a slow dim up or down of the load.
• Software dimmer for resistive, inductive or capacitive load
• 2 outputs, isolated from the backplane bus
• Output current 2A
• Automatic load detection
• Voltage AC 100 ... 230V
• Frequency range 47 ... 63Hz
• LEDs for supply voltage and error message
1
2
3
4
[1]
[2]
[3]
[4]
Label for module description
Label for the bit address with
description
LED status indicator
Edge connector
LED
PW
F
Description
LED (green)
Module is power supplied
by back plane bus
LED (red)
Overload, overheat,
missing power supply or
parameterization error
DO 2xAC230V 2A
SM 222
PW
F
VIPA 222-1DB00
X2
34
1
2
3
4
5
6
7
8
9
I0
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
AC 100...230V load voltage (L)
AC 100...230V load voltage (L)
not connected
Output Q+0.0 channel 0
not connected
Output Q+2.0 channel 1
not connected
AC 100...230V neutral conductor (N)
AC 100...230V neutral conductor (N)
AC 100...230V neutral conductor (N)
Order data
Description
Properties
Construction
Status indicator
pin assignment