Technical data

Chapter 4 Digital output modules Manual VIPA System 200V

4-22 HB97E - SM - Rev. 09/19

222-1BH50 - DO 16xDC 24V 0.5A NPN

DO 16xDC 24V 0.5A NPN VIPA 222-1BH50

The digital output module accepts binary control signals from the central

bus system and controls the connected loads at the process level via Misfit

outputs. It provides 16 channels that operate as Low-Side switches and

that are interconnected via the load voltage. Low-Side switches are suitable

for the control of grounds. When a short circuit occurs between the

switched line and ground the result is that the load is activated until the

short circuit has been removed. Short circuits do not place an additional

load on the supply voltage.

• 16 Low-Side outputs

• Output current per channel 0.5A

• Suitable for small motors, lamps, magnetic valves and contactors

[1]

[2]

[3]

[4]

Label for module description

Clip

Recessed connector for the

interface to a output connection

Clip

Connector

2526

23...26

1...6

Assignment

DC 24V supply voltage

Output Q+0.0

Output Q+0.1

Output Q+1.6

Output Q+1.7

Supply ground

Order data

Description

Properties

Construction

Pin assignment