Specifications

MSD/PT0600/200 - Technical Reference Manual 13
8. Presets
The MSD comes with 11 user configurable presets.
5 of these presets are factory configured on delive-
ry of your MSD. Select the preset closest to your
individual use of the MSD. The screen automatical-
ly adjusts to the selected number of PPM channels.
If any change has to be made to a preset please
refer to the Audio Matrix Menu in the Software
User’s Manual for details on how to re-assign input
(sources) and outputs (destinations).
None of the factory configured presets is using the
Analogue/Digital output.
Below is listed a factory preset selection chart for
all the supported MSD models.
Supported Model: MSD200C, MSD600C-III, PT0200C, PT0600C-III
Preset # Preset Name Description Source
Ana/Dig
0 BASE SETUP This is the default (power up) setting, and can be
user-changed [by special procedure only] Ana/Dig
1 ANALOGUE All PPM are set to the analogue mode Ana
2 DIGITAL All PPM are set to the digital mode Dig
3 ANALOGUE+MS All Analogue setup with Sum/Diff Ana
4 DIGITAL+MS All Digital setup with Sum/Diff Dig
5 USER User definable Ana/Dig
6 USER User definable Ana/Dig
7 USER User definable Ana/Dig
8 USER User definable Ana/Dig
9 USER User definable Ana/Dig
10 USER User definable Ana/Dig