User`s manual

MSD100 Series - User’s Manual

3 Press [DEFAULT] and follow procedures in this

section for adjusting settings for brightness, viewing

angle (contrast) or preferred scale.

4 Turn off the power again. The new settings will be

stored in memory as the new defaults for the next

power up.

4.10 Bitstream Status Display

The Bitstream Status Display is used for viewing status

information for each AES/EBU channel, provided that this

information is available in the signal. This display is

included in MSD100AES/SA.

4.10.1 AES/EBU DECODING MODE

Table 4-3 lists the Bitstream Status Display information

for the AES/EBU (Professional) decoding mode:

Figure 4-7. Set Up Utility Menu