User`s manual

MSD100 Series - User’s Manual
Use the [UTIL] menu to select the different scales shown
in Figure 4-4.
4.5 Level Meters
The MSD100 Level Meter provides these additional func-
tions:
• “Flying” Peak indicators
• Peak Hold
• LED-overload indicators
• Individual reference level selection
4.6 Adjusting Input Gain [20dB]
You can increase the input sensitivity to obtain the best
possible dynamic range and accuracy for a weak signal.
To increase the input sensitivity by 20dB:
Press the function button for . The checkbox
turns black.
☞
Note: The input gain function is not available on
the digital MSD100AES/SA model.
4.7 Using the Utilities Menu
You can use the Utilities [UTIL] menu to:
• Adjust display brightness
• Adjust contrast for viewing angle
• Select PPM scales
• Select inverted display
☞
Note: The high-quality LCD display reacts
quickly to light and angle adjustments, but may
still require that you allow several seconds for
the display to stabilize between adjustments.
16
Figure 4-4. Available PPM Scales
TYPE I TYPE IIA TYPE IIB DIN VU DMU1 DMU2
NORDIC BBC EBU