User`s manual

MSD100 Series - User’s Manual
4.1.1 INITIAL DISPLAY AT POWER UP
After power up, the LCD panel initially displays the soft-
ware version installed, for example MSD100 1.54.
4.1.2 FUNCTION KEYS
The three black keys operate the functions displayed in
the menu text line directly above them. For example, the
left function key toggles between SPECT and EXIT.
An empty black box displayed next to a function in the
menu text line, such as shown below, indicates that this
function is disabled or OFF.
Clicking the function key directly below 20dB toggles
between ON (black box) and OFF (empty box) status.
This operation applies to other functions such as Left,
Right, Hold and Fast.
The function keys are also used to increase and decrease
values as shown below.
4.1.3 ADDITIONAL INFORMATION
DISPLAYED ON DIGITAL MODELS
In addition to the phase meter, audio vector oscillo-
scope, level meter and menu text line, the digital
MSD100AES/SA models also show the sampling frequen-
cy. Figure 4-2 shows the frequency of .
☞
Note: If no signal is present, this numeric field will
indicate [OPEN].
13
Figure 4-2. MSD100AES/SA with Sampling
Frequency