User`s manual

10MSD100 Series - User’s Manual
3.2 Audio Connections
For all MSD100 models, please observe the
following precautions:
• Use standard audio signal cable or similar
• Ensure that all connections are firmly secured
• Allow sufficient loose cable for the unit to be
tilted and turned
Rear-cabinet connector types vary by model, as
shown in Table 3-1.
TABLE 3-1. MSD100 SERIES AUDIO CONNECTIONS
Model Socket Type Pinouts Input Signal
MSD100 RCA-phono Shield – ground Analogue
sockets Pin – signal
Unbalanced
Marked [L] Left stereo
and [R] Right
MSD100AES/SA Female XLR Pin 1 = Ground Digital
sockets Pin 2 = Signal
Pin 3 = Signal Balanced
(IEC269-12 AES/EBU
compliant) or SP/DIF
MSD100T/SA Female XLR Pin 1 = Ground Analogue
sockets Pin 2 = In Phase
Pin 3 = Out of Balanced
Inputs are Phase
transformer (IEC268-12
balanced compliant)
Note: A male
XLR socket is
available for
routing sig-
nals to other
equipment.
Note: Observe
that signals on
pins 2 and 3 are
“in phase” in
the digital
mode.