User manual

4. Installation via clamp
Please refer to the picture below:
Screw one clamp each via a M12 screw and nut onto the Omega holders.
Insert the quick-lock fasteners of the first Omega holder into the respective holes on
the bottom of the device. Tighten the quick-lock fasteners fully clockwise. Install the
second Omega holder.
Pull the safety-rope through the holes on the bottom of the base and over the
trussing system or a safe fixation spot. Insert the end in the carabine and tighten the
safety screw.
-4--
http://www.djslighting.com/