User Manual

Zenmuse Z15-GH4

(

)

User Manual

PC Assistant Tuning

Upgrade

You can view the latest rmware version information on this page. Upgrade the rmware by following the

steps below:

1. Connect the gimbal to your computer with a Micro-USB cable, and wait until the blue indicator LED in the

Assistant software is blinking.

2. Click “Upgrade”.

3. Wait for the download to nish.

4. Click “Upgrade” again and then click “Conrm”.

5. Power cycle the gimbal (turn it off, then on again) after the upgrade is complete.

Ensure your computer is connected to the internet.

Close any antivirus programs and network rewalls during the upgrade.

Ensure the gimbal is powered on during the upgrade.

Do not disconnect the USB cable during the upgrade.

Info

You can check the Assistant version via Info.

S/N is a 32 digit authorization code for function activations. The authorization code for your unit is lled in at

the time of manufacture. In the future, you may be asked to ll in a new S/N if you require function upgrades.

Fill in the S/N and then click the Write button. If you ll in an invalid S/N more than 30 times, your gimbal will be

locked and you will have to contact our customer support.