Owner manual
Table Of Contents
- Content
- Trademark
- Disclaimer & Warning
- Certifications
- Symbol Instruction
- Assembly &Configuration
- Basic Flying Test
- Advanced Functions
- WM Assistant for Mobile Device
- Appendix
- FAQ
- Fix the TBE (Toilet Bowl Effect) Problem
- Reinstall the GPS in an Offsetting Angle
- Attitude Controllable When One Motor Output is Failed
- Flight Restriction in Specified Area Description
- Abnormal Cases in Motor Test
- Solution for LED yellow and green blinking
- Solutions for failed gain value adjustment in the Assistant software
- CE Statement
©2013-2014 DJI Innovations. All Rights Reserved.28 |
Solutions for failed gain value adjustment in the Assistant software
If you fail to adjust the gain value in the Assistant software, please check the follow items to solve the problem.
(1) Make sure the MC has connected and communicated with the Assistant software successfully.
(2)Make sure the Receiver has connected to the MC successfully.
(3)Make sure you have selected the correct Receiver type in the Assistant software, and then you can try to adjust
the gain value again.