Owner manual

©2013 DJI Innovations. All Rights Reserved.25 |
Specifications
General
Built-In Functions
 Three Modes Autopilot
 PPM Receiver Supported
 2-axle Gimbal Support
 Enhanced Fail Safe
 S-Bus/S-Bus2 Receiver Supported
 Intelligent Orientation Control
 Multi Output Frequency Supported
 Low Voltage Protection
Peripheral
Supported Multi-rotor
 Quad-rotor: I4, X4;
 Hexa-rotor: I6, V6, Y6, IY6;
 Octo-rotor: X8, I8, V8.
Supported ESC output
400Hz refresh frequency.
Recommended Transmitter
Only PCM or 2.4GHz with minimum 7 channels and
fail-safe function available on all channels.
Recommended Battery
2S ~ 6S LiPo
Assistant Software System Requirement
Windows XP SP3 / 7 /8
Electrical & Mechanical
Power Consumption
MAX 5W
(0.9A@5V, 0.7A@5.8V, 0.5A@7.4V, 0.4A@8V)
Operating Temperature
-5°C to +60°C
Total Weight
<= 118g (overall)
Dimensions
 MC: 51.2mm x 38.0mm x 15.3mm
 IMU: 41.4mm x 31.1mm x 27.8mm
 GPS & Compass: 50mm (diameter) x 9mm
 LED Indicator: 25mm x 25mm x 7mm
 PMU: 39.5mm×27.5mm×9.7mm
Flight Performance (can be effected by mechanical performance and payloads)
Hovering Accuracy (GPS Mode)
 Vertical: ± 0.5m
 Horizontal: ± 2m
Maximum Wind Resistance
<8m/s (17.9mph / 28.8km/h)
Max Yaw Angular Velocity
150deg/s
Max Tilt Angle
35°
Ascent / Descent
±6m/s