Instructions

8
EN
Turnonyourmobiledevice'sWi-FiandentertheWi-Fipasswordshownontheaircrafttoconnect
totheMavicAirnetworkifforanyreasonyoucannotscantheQRcode.
WhenusingWi-FiinawideopenareawithnoElectro-MagneticInterference,transmission
distance is approximately 262 ft (80 m) at an altitude of 164 ft (50 m).
LinkingisrequiredwhenswitchingbacktoRemoteControlmode.TheWi-Fifrequencyofyour
mobiledevicecanbesetto2.4GHzor5GHz.SetyourWi-Fito5GHzforlessinterference.Once
connectedtotheMavicAir,youcanchangeyourWi-FipasswordorresetyourWi-Ficonnection.
(RefertotheUserManualformoreinformation)
WatchthetutorialintheDJIGO4apporontheOfcialDJIwebsitetolearnmore.
AlwayssetanappropriateRTHaltitudebeforetakeoff.WhentheaircraftisreturningtotheHome
Point,youshouldguideitwiththecontrolsticks.
Mavic_XXX
DJI GO 4
App
Normal
TapFly
QuickShot
Tripod
ActiveTrack
SmartCapture
1. Power on the aircraft.
2. Press and hold the Function Button on the aircraft for four seconds until you hear a
doublebeep,switchingtoWi-Ficontrolmode.
3.LaunchtheDJIGO4appandtaptheiconinthetoprightcornerofyourscreen.Next,
scantheWi-FiQRCodeonthefrontarmtostarttheconnection.
4.TapAutoTakeoff.
5.NowyoucanytheaircraftwithtouchcontrolviaVirtualJoysticks.
Controlling ight with Virtual Joysticks on your mobile device via Wi-Fi
In the DJI GO 4 App