Instructions

6
EN
Use your DJI account to activate the aircraft. Activation requires an internet connection.
4. Preparing the Remote Controller
5. Preparing for Takeoff
Internet
1
3
2
DJI GO 4
App
Set the antennas parallel to each other
Power on the remote
controller
Power on the aircraft Launch the DJI GO 4 app
OptimalTransmissionRange
Strong Weak
Place one end of the remote
controller cable to the end
of the slot on the side of the
remote controller.
Unfold the antennas and
mobiledeviceclamps,
then attach the control sticks.
Attach your mobile
device within the clamps.
Ensurethecontrolsticksarermlymounted.
TheremotecontrollercablewiththeLightningConnectorismountedbydefault.Usethe
appropriate cable for your mobile devide to connect to the remote controller.
WhenusinganiPadortablet,usetheUSBportontheremotecontroller.
Do not use the Micro USB and the USB ports simultaneously for linking video. Disconnect one
port from the video-linking device if the other port is in use.