User Guide

Table Of Contents

Safety at a Glance

By using this product, you signify that you have read, understand, and

accept the terms and conditions of this guideline and all instructions at

https://www.dji.com/rs-3-mini. EXCEPT AS EXPRESSLY PROVIDED IN AFTER-

SALES SERVICE POLICIES AVAILABLE AT (HTTP://WWW.DJI.COM/SERVICE), THE

PRODUCT AND ALL MATERIALS AND CONTENT AVAILABLE THROUGH THE

PRODUCT ARE PROVIDED "AS IS" AND ON "AS AVAILABLE BASIS" WITHOUT

WARRANTY OR CONDITION OF ANY KIND.

1. DJI

RS 3 Mini is powered by a built-in battery through the grip. Users take full responsibility

for all operations and usage.

2. The grip should be used in temperatures from -10° to 45° C (14° to 113° F). Use of the grip

in environments above 50° C (122° F) can lead to a fire or explosion. Use of grip below 0° C

(32° F) can significantly reduce operation time.

3. DO NOT disassemble or pierce the grip in any way or the battery may leak, ignite, or explode.

4. DO NOT drop or strike batteries. DO NOT place heavy objects on the grip or charger.

5. DO NOT heat batteries. DO NOT put the grip in a microwave oven or in a pressurized container.

6. Contact DJI Support immediately if any of the components break in order to avoid further

damage and risk of injury.

7. DJI RS 3 Mini has built-in high precision sensors. Dropping or striking it in any way may

cause permanent sensor damage, leading to abnormal functionality. Contact DJI Support

immediately if this happens.

1. DO NOT disassemble DJI RS 3 Mini or its accessories. Improper or poor handling could

damage the gimbal.

2. Make sure to keep DJI RS 3 Mini clear of dust and water. Otherwise, it may be damaged.

3. Make sure to mount the gimbal firmly when using DJI RS 3 Mini in a high-speed situation.

1. The motor can get hot after long operation times. Remain cautious and avoid touching

it where possible.

2. DO NOT obstruct the gimbal movements. Otherwise, you may injure your hand.