User manual
©
2014 DJI. All Rights Reserved.
29
Ronin
User Manual
Remote Control Power LED Indicator Status
Power LED Indicator Sound Remote Control Status
—
Solid red
None Normal
2VJDL3FEnBTIJOH
B-B-B…… Low voltage alert. It will sound at 4V-4.3V. Replace the
batteries immediately.
4MPX3FEnBTIJOH
B--B--B…… Inactivity alert. Will sound after 15 minutes of inactivity. It will
stop once you continue using the remote control or turn it off.
The remote control will automatically power off when the battery voltage drops below 4V.
Remote Control Features
MODE: The MODE switch is used for toggling SmoothTrack.
1. In Position 1, SmoothTrack is off. Remote control will freely position
pan axis stops and holds the last input position of the pan axis control
stick.
2. In Position 2, SmoothTrack is on. Remote control will freely position
pan axis stops and holds the last input position of the pan axis control
stick.
3. In Position 3, SmoothTrack is on. The gimbal will always point and
reset pan to the forward facing direction once the pan axis control
stick is let go.
Position 1
-Free, SmoothTrack Off
Position 2 -Free, SmoothTrack On
Position 3
-Reset to Center, SmoothTrack On
FUNCTION: 1. The FUNCTION switch is used to select the SmoothTrack speed.
There are 3 possible selections: Fast, Normal and Slow. The value
of each speed can be preset in the App or PC Assistant.
Position 1 -Fast Position 2 -Normal Position 3 -Slow
2. Activating Kill Switch.
2VJDLMZnJQUIF'6/$5*0/TXJUDICFUXFFO1PTJUJPOBOE1PTJUJPO
3 consecutively for 3 times and you will activate the motor kill
switch. Do the same again to turn off the motor kill switch. Prior to
re-activating the gimbal motors, be sure to position the camera in
the standard operating position. The motor kill switch is useful in
case the gimbal operator runs into an issue or you need to make a
quick mechanical adjustment to the gimbal or camera setup.
Remote Control