User manual

10
©
2014 DJI. All Rights Reserved.
Ronin
User Manual
Checking the battery level: When the battery is powered off, pressing the battery power button once
will display the current battery level.
Powering on: When the battery is powered off, press and hold for 1 second to turn on the smart battery.
Powering off: When the battery is powered on, press and hold for 1 second to turn off the smart battery.
Description of the Smart Battery Level Indicators
The battery level indicators show the current battery level during both the charging and discharging
process. The following is a description of the indicators.
: The LED is in a solid state on :The LED is blinking : The LED is off
Discharging process
LED1 LED2 LED3 LED4 Current battery level
87.5%~100%
75%~87.5%
62.5%~75%
50%~62.5%
37.5%~50%
25%~37.5%
12.5%~25%
0%~12.5%
<0%
Tuning Stand
You can use the tuning stand during setup or for storage of the gimbal. The following steps show
how to use the tuning stand.
1. Put the stand in the upright position as shown in the picture below.
 1VUZPVSUIVNCPOUIFTJMWFSCVUUPO<>6TJOHZPVSJOEFYBOENJEEMFmOHFSCFIJOEUIFBSNQVMM
the lower legs outward away from the stand, and then pull downward. Then pull the upper arms
outward and upward.
3. The upper half of this tuning stand can be removed by loosening the knob [3]. You can use it with
BOZ$TUBOETUZMFTUVEUIBUmUTUIFIPMF<>8IFONPVOUJOHPOUPB$TUBOECFTVSFUPDIFDLUIF
balance of the stand so as to not have the Ronin with a camera tilt over. When setting on a table,
NBLFTVSFUIFUBCMFJTBnBUBOEFWFOTVSGBDF
Using the Smart Battery
[
6
]
[
1
]
[
2
]
[
3
]
[
4
]
[
5
]
[1] [2] [3] [4] LED indicator lights
[5] Power Button
(with one LED battery power indicator.)
[6] Thumb Screws
Getting Started