User Manual
6
©
2020 DJI All Rights Reserved.
2. DO NOT leave the battery unattended during charging. DO NOT charge the battery near ammable
materials or on ammable surfaces such as carpet or wood.
3. DO NOT charge the battery immediately after use. Wait until it cools down to near room temperature.
Charging the battery outside of the temperature range of 5° to 40° C (41° to 104° F) may lead to
leakage, overheating, or battery damage.
4. Disconnect the charger when not in use. Examine the charger regularly for damage to the cord, plug,
enclosure, or other parts. DO NOT clean the charger with denatured alcohol or other flammable
solvents. DO NOT use a damaged charger.
Battery Storage, Transportation and Disposal
1. Dispose of the battery in specic recycling boxes only after a complete discharge. DO NOT place the
battery in regular trash containers. Strictly follow your local regulations regarding the disposal and
recycling of batteries.
Use
1. Charge the battery to bring it out of hibernation before using for the rst time.
2. Make sure the batteries are fully charged before using.
Charging
1. Make sure to turn o the battery before charging to avoid power port damage. Make sure the battery
level is 95% or lower before charging. If the battery level is higher than 95%, discharge the battery until
the battery level is 95% or lower. Otherwise, the battery will not charge.
2. The battery is designed to stop charging when it is fully charged. However, it is good practice to monitor
the charging progress and disconnect the battery when fully charged.
Disposal
1. If the battery is disabled and the battery cannot be fully discharged, contact a professional battery
disposal or recycling agent for further assistance.
2. If the battery cannot be powered on after over-discharging, dispose of the battery.
Motors
To avoid component malfunction, serious injury, and property damage, observe the following rules:
1. Make sure that the motors are securely mounted and rotating smoothly before powering on.
2. DO NOT attempt to modify the structure of the motors.
3. DO NOT touch or let your hands come into contact with the motors, motor mounting plates, or inside
of the Mecanum wheel immediately after powering o the robot.
1. Make sure there are no foreign objects inside of the motors.