User Manual

Check all of the included parts listed in the In the Box section in the quick start guide, and read the

disclaimer and safety guidelines. Complete the assembly with the help of the quick start guide and the video

tutorial on DJI’s official website (http://www.dji.com). Refer to the RoboMaster S1 User Manual on DJI’s

ocial website for more comprehensive information. Make sure you fully understand all safety guidelines,

government regulations, and the functionality of each individual part. If you have any questions or problems

during the assembly, maintenance, or use of the product, contact DJI or a DJI authorized dealer.

Individual Parts

Regarding Genuine and Functional Parts

To avoid component malfunction, serious injury, and property damage, observe the following rules:

1. Use only genuine DJI parts or parts certified by DJI. Unauthorized parts or parts from non-DJI

certied manufacturers may cause system malfunctions and compromise safety.

2. Make sure there are no foreign objects inside of the product or its components, such as oil, sand,

water, or gel bead residue (excluding water or gel bead residue found inside the gel bead launcher

and container).

3. Make sure the robot and its components are all in good working order, damage-free, and functioning

properly. Components include, but are not limited to, the gimbal, intelligent controller, chassis, and

Intelligent Battery.

4. DO NOT disassemble the parts that have been installed before delivery. Unauthorized disassembly

may cause malfunctions and aect the functionality and safety of the product.

5. Follow the assembly instructions for cable connection and wiring to avoid cable damage. DO NOT

forcibly pull the cables when plugging and unplugging them. Otherwise, the cable connectors may be

damaged.

Blaster

Launching a gel bead could potentially cause injury or property damage. Pay special attention to the

surrounding environment during use.

1. Make sure to use ocial DJI gel beads. Non-DJI gel beads may cause the blaster to malfunction.

2. When using the blaster, wear protection for the face and eyes.

3. Before using the blaster, make sure the surrounding environment is suitable.

4. DO NOT aim at people or animals when launching the gel beads or point the launch trajectory light at

eyes.

5. Only use blasters with gel beads against other robots if there are skilled operators present.

6. After each use, make sure there are no gel beads in the gel bead container or blaster.

7. The gel beads expand with water. DO NOT put them into the mouth, nose, ears, or other body parts.

Make sure to keep them out of reach of children and pets to avoid choking hazard or other injuries

caused by accidental swallowing.