User manual
Table Of Contents
- Using this User Manual
- Contents
- Product Profile
- Modules and Functions
- Using the RoboMaster App
- Omnidirectional Chassis
- Intelligent Controller
- Camera
- Speaker
- Intelligent Battery
- Robot LED Indicator Description
- Servo
- Robotic Arm and Gripper
- Power Connector Module
- Infrared Distance Sensor (TOF)
- Sensor Adapter
- Straight Connecting Rod
- Front Axle Extension Platform
- Extension Building Block
- Robot and Third-Party Platforms
- Gamepad (Not Included)
- Operating Your Robot
- Gameplay
- Appendix
62
©
2020 DJI All Rights Reserved.
ROBOMASTER EP Core User Manual
Using the S-Bus Port
A remote controller that supports the S-Bus protocol can be used to control the robot by connecting
to the S-Bus port of the motion controller. Users must prepare their own receiver and remote
controller. It is recommended to use a Futaba R6303SB receiver.
Connection
Connect the S-Bus port of the motion controller to the S-Bus port of the receiver by using the 3-pin
servo cable.
S-BUS
UART
S-BUS