User manual
Table Of Contents
- Using this User Manual
- Contents
- Product Profile
- Modules and Functions
- Using the RoboMaster App
- Omnidirectional Chassis
- Intelligent Controller
- Camera
- Speaker
- Intelligent Battery
- Robot LED Indicator Description
- Servo
- Robotic Arm and Gripper
- Power Connector Module
- Infrared Distance Sensor (TOF)
- Sensor Adapter
- Straight Connecting Rod
- Front Axle Extension Platform
- Extension Building Block
- Robot and Third-Party Platforms
- Gamepad (Not Included)
- Operating Your Robot
- Gameplay
- Appendix
©
2020 DJI All Rights Reserved.
33
ROBOMASTER EP Core User Manual
5. As shown below, connect the XT30 power cable in the chassis cabin to the 12V power input
port and the B end of the 12cm data cable to the CAN bus port of the power connector module.
Secure the module at the chassis cabin.
LED Indicator Description for Power Connector Module
The LED indicator is used to indicate the status of the power connector module. Details are as
follows:
LED Indicator Power Connector Module Status
Solid white
Normal power input and 5V output
Solid red
Normal power input, but 5V output has an overcurrent or
is short-circuited
Off
Abnormal power input