User manual
Table Of Contents
- Using this User Manual
- Contents
- Product Profile
- Modules and Functions
- Using the RoboMaster App
- Omnidirectional Chassis
- Intelligent Controller
- Camera
- Speaker
- Intelligent Battery
- Robot LED Indicator Description
- Servo
- Robotic Arm and Gripper
- Power Connector Module
- Infrared Distance Sensor (TOF)
- Sensor Adapter
- Straight Connecting Rod
- Front Axle Extension Platform
- Extension Building Block
- Robot and Third-Party Platforms
- Gamepad (Not Included)
- Operating Your Robot
- Gameplay
- Appendix
32
©
2020 DJI All Rights Reserved.
ROBOMASTER EP Core User Manual
2. Connect the power cable and a Y-cable.
3. After connecting a Y-cable to the motion controller as shown below, place the power cable on
the chassis and pull the XT30 power cable of a Y-cable through the chassis middle frame to the
chassis cabin.
4. As shown below, connect the A end of a 12cm data cable to the motion controller and pull the B
end through the chassis middle frame to the chassis cabin.
12 cm