User manual
Table Of Contents
- Using this User Manual
- Contents
- Product Profile
- Modules and Functions
- Using the RoboMaster App
- Omnidirectional Chassis
- Intelligent Controller
- Camera
- Speaker
- Intelligent Battery
- Robot LED Indicator Description
- Servo
- Robotic Arm and Gripper
- Power Connector Module
- Infrared Distance Sensor (TOF)
- Sensor Adapter
- Straight Connecting Rod
- Front Axle Extension Platform
- Extension Building Block
- Robot and Third-Party Platforms
- Gamepad (Not Included)
- Operating Your Robot
- Gameplay
- Appendix
24
©
2020 DJI All Rights Reserved.
ROBOMASTER EP Core User Manual
DO NOT expose the camera to liquids or immerse in water.
DO NOT store the camera in a humid place.
DO NOT touch the lens.
If the camera is wet, wipe it with a dry soft cloth.
Camera
The camera features a 1/4-inch sensor with 5 million pixels and a FOV of 120°, allowing users to
control the robot from a rst-person perspective.
Clean the lens regularly to avoid blurring or halos. Use a special lens cleaner to make sure that
there is no foreign matter on the lens after cleaning and that it does not damage the lens.
1. Camera Lens
2. Microphone
3. Camera Port
Used to connect the camera to
the intelligent controller.
2
3
1
Make sure the speaker is properly installed and does not obstruct other components'
movements.
Speaker
The speaker connects to the intelligent controller via a 2.5mm device with a power rating of 2 W.
10. Connect Button
The connect button functions differently when connecting via Wi-Fi or router.
Connection to Wi-Fi: Once the Wi-Fi password is forgotten, press and hold this button for five
seconds to reset the Wi-Fi password.
Connection to Router: When scanning the QR code with the robot to join a network, press this button
rst.
DO NOT pull on the antenna.
If the intelligent controller antenna is damaged, the performance of the robot will be
affected. Contact DJI if the antenna is damaged.