User manual
Table Of Contents
- Using this User Manual
- Contents
- Product Profile
- Modules and Functions
- Using the RoboMaster App
- Omnidirectional Chassis
- Intelligent Controller
- Camera
- Speaker
- Intelligent Battery
- Robot LED Indicator Description
- Servo
- Robotic Arm and Gripper
- Power Connector Module
- Infrared Distance Sensor (TOF)
- Sensor Adapter
- Straight Connecting Rod
- Front Axle Extension Platform
- Extension Building Block
- Robot and Third-Party Platforms
- Gamepad (Not Included)
- Operating Your Robot
- Gameplay
- Appendix
20
©
2020 DJI All Rights Reserved.
ROBOMASTER EP Core User Manual
EP Core cannot use the blaster, gimbal, or their related functions in Solo, Battle, or Lab
mode. It is recommended to connect the blaster or gimbal rst.
Omnidirectional Chassis
Introduction
The chassis is an omnidirectional motion platform based on the Mecanum wheels, which can be
used to move forward, traverse, skew, rotate, or a combination of movements at once.
Avoid crashing into any objects at high speed.
Motion Controller
Overview
The motion controller is the core module for the chassis movement, providing a rich external module
interface for video transmission and connecting the, battery, armor, and motors. It also integrates
an omnidirectional wheel motion control algorithm, power management system, motor management
system, and a chassis management system.
S-BUS
UART
S-Bus Signal
5V
5V
GND
GND
GND
Signal
RX
TX
1 1 1 1
2
3
3 3 34 4
5
6
8
7
9
1
0
1. CAN Bus Port
CAN Bus port used for armor module connection.