User manual
Table Of Contents
- Using this User Manual
- Contents
- Product Profile
- Modules and Functions
- Using the RoboMaster App
- Omnidirectional Chassis
- Intelligent Controller
- Camera
- Speaker
- Intelligent Battery
- Robot LED Indicator Description
- Servo
- Robotic Arm and Gripper
- Power Connector Module
- Infrared Distance Sensor (TOF)
- Sensor Adapter
- Straight Connecting Rod
- Front Axle Extension Platform
- Extension Building Block
- Robot and Third-Party Platforms
- Gamepad (Not Included)
- Operating Your Robot
- Gameplay
- Appendix
©
2020 DJI All Rights Reserved.
17
ROBOMASTER EP Core User Manual
5. Connect
The robot must be connected with the app. Tap to see a guide on how to connect via Wi-Fi or router.
Connection via Wi-Fi
Users can enter both Solo and Battle mode when connecting via Wi-Fi.
Follow the steps below to connect:
(1). Slide the mode switch on the intelligent controller to
and power on the robot.
(2). Run the RoboMaster app, go to Wi-Fi settings on the mobile device, select the Wi-Fi name
(RMEP-XXXXXX) shown on the sticker on the body of the robot, and enter the password. The
default password is 12341234.
(3). Wait for the robot and the app to connect. The robot will emit a sound once connected.
Resetting the Password
Make sure the mode switch on the intelligent controller is slid to the Connection via Wi-Fi position,
and press and hold the connect button for ve seconds to reset the password.