User manual

©
2020 DJI All Rights Reserved.
7
Phantom 4 RTK User Manual
Preparing the Remote Controller
1. Mounting the Remote Controller Battery
The remote controller uses an easily removable interchangeable Intelligent
Battery for long-term operation.
1
Slide the battery compartment cover lock on the back of the remote
controller down to open the cover.
2
Insert the Intelligent Battery into the compartment and push it to the top.
3
Close the cover.
3. Battery Installation
Slide battery into the battery compartment according to the arrow’s direction as shown below.
2. Attaching the Propellers
Mount the propellers with black propeller rings to the motors with black dots. Mount the propellers with
sliver propeller rings to the motors without black dots. Press the propeller down onto the mounting plate
and rotate in the lock direction until it is secured.
To remove the Intelligent Battery, open the cover, press and hold the battery release button, then
push the battery downward.
3
2
When the upper and lower buckles on the battery are in place, a click sound indicates the battery is
securely installed. Failure to do so may aect the ight safety of your aircraft.