User manual

©
2020 DJI All Rights Reserved.
61
Phantom 4 RTK User Manual
Purchase
Once purchased, the Cloud PPK Service will be bound to the aircraft SN. The app can only recognize
operation data that corresponds to an aircraft SN with Cloud PPK Service activated.
Contact your local DJI authorized dealer to purchase an activation code for Cloud PPK Service.
In-app purchase is only supported in Mainland China. Users in other countries or regions can
purchase the activation code of Cloud PPK Service from a dealer.
Activation
1. Connect the aircraft for which Cloud PPK Service has been purchased, or insert the microSD card that
contains the operation data of the aircraft into the remote controller, so that the app can recognize the
unique aircraft SN.
2. Go to the main screen of the app, tap
on the upper left corner, then , and select Cloud PPK
Service to enter the settings menu, and tap Activate.
3. Read the Terms of Use and Privacy Policy carefully, and check the box to agree.
4. Input the activation code from the dealer.
5. Cloud PPK Service is available once activated.
Users can use Cloud PPK Service to calculate data collected before the activation if the
rmware of the aircraft is v02.02.0312 or later.
Usage
Go to the Cloud PPK Service settings page. First, enable PPK Data Upload, and then tap START USING
NOW to enter the Cloud PPK Service page. The page includes Account Information, Create Task, Current
Tasks, and Past Tasks. In the Account Information tab, view the activated aircraft SN. In the Create Task tab,
create tasks for PPK calculations. In Current Tasks and Past Tasks, view task progress and download PPK
calculation results. The process is as follows:
1. Access PPK data from the aircraft:
Data storage path: The folder that contains the PPK data and signature le is the same folder where
images of the ight tasks are stored. Make sure that the name of the folder is same as the task code of
the data, for example, microSD card\DCIM\SURVEY\100_0005.
To import data: Insert the microSD card that contains the data into the remote controller. The app will
recognize the folders in the card. Users can select data from one or multiple ight tasks in the app.
Users can select the desired data in the Submitted tab if the aircraft PPK data has already
been uploaded to the server.
When users want to use aircraft PPK data with base station data from a RINEX base station,
the RINEX base station data must be stored in: microSD card\third_base.
2. Make sure that the remote controller has access to the internet via a 4G dongle or Wi-Fi. In the Network
Diagnostics page, check the status of the links and make sure the remote controller is connected to the
DJI AG platform.
3. Go to the Cloud PPK Service page in the app.
4. Tap Create Task, and select one or more aircraft PPK source datasets. View details on the right side of
the screen.