User manual

©
2020 DJI All Rights Reserved.
59
Phantom 4 RTK User Manual
two statuses: FIX indicates that dierential data analysis is completed and RTK can be used for aircraft
positioning. Only under this status can the aircraft take o. FLOAT indicates that dierential data is in
analysis. Waiting for it to be FIX is required.
: This icon is displayed if the RTK is disabled, indicating the current GNSS signal strength and
number of satellites connected.
5. RTK Data Source Status
Icons displayed when using RTK data. The display varies when using the D-RTK 2 or Network RTK
Service.
: Displays RTK signal strength when using the D-RTK 2.
: Indicates that the connection with the D-RTK 2 is abnormal. Refer to the prompts in the app.
: Displays RTK signal strength when using the Network RTK Service.
: Indicates that the connection with the Network RTK server is abnormal. Refer to the prompts in the
app.
6. Control and HD Video Link Signal Strength
: Shows the signal strength of the control and HD video downlink connection between the aircraft and
the remote controller.
7. Obstacle Sensing Function Status
: Tap into this button to enable or disable features provided by the Vision System.
8. Camera Parameters
Displays camera settings parameters and capacity of the microSD card.
9. Battery Level
: Shows the current battery level. Tap to set the Low Battery Warning threshold and view battery
information.
10. More Settings
Tap
to enter the extended menu to view and adjust the parameters of all other settings.
: Aircraft Settings — Includes Home Point settings, Return to Home Altitude, maximum altitude,
distance limit, remote controller signal lost action, advanced settings, etc.
RTK: RTK Settings — Includes RTK function switch, RTK service type and their corresponding settings.
: Sensor Settings — Includes enabling obstacle avoidance, radar map display, advanced vision
settings, etc.
: Remote Controller Settings — Includes remote controller calibration, stick mode, linking, etc.
: Image Transmission Settings — Includes channel mode and sweep frequency chart selection.
: Aircraft Battery Settings — Includes low battery warning thresholds, battery information, etc. When
a high discharge current, a short circuit, high or low discharge temperatures or battery cells damage is
detected, there will be an on-screen prompt.
: Gimbal Settings — Includes gimbal mode, advanced settings, gimbal roll adjustment, and auto
gimbal calibration.
: General Settings — Includes map settings, ight route display, to nd aircraft, etc.
11. Auto Exposure Lock
AE
: Tap to lock the exposure value.
12. Photo/Video Button
: Tap to switch between photo and video recording modes.