User manual

58
©
2020 DJI All Rights Reserved.
Phantom 4 RTK User Manual
1. Main Screen
: Tap this icon to return to the main screen.
2. Aircraft Status
In Flight (RTK)
: Indicates current ight modes and warning messages.
3. Battery Level Indicator
: The battery level indicator provides a dynamic display of the battery level. The colored zones
on the battery level indicator represent the power levels needed to carry out dierent functions.
4. RTK / GNSS Signal Strength
RTK
12
: This icon is displayed once the RTK is enabled and begins working properly. The number on
the upper right corner indicates the number of satellites connected. The RTK status below includes
Camera View
After tapping Fly in the main screen, users can switch between Camera View and Map View. The
descriptions below use the Camera View as an example.
99%
19:29
SHUTTER
EV
WB
0.3 Auto
F
5.6
AE
78%
RTK
12
D 10.0MH 10.0M
V.S: 0.0M/S H.S: 3.3M/S
89
%
1
67
%
2
10米
112
In Flight (RTK)
End Pause
21
19
20
21 4 5 6 7 8 9
11
12
13
15
14
10
161718
3
4. Location
: Tap to center the map around the aircraft’s location or the latest recorded Home Point.
5. Clear Screen
: Tap to clear the ight path currently shown on the map.
6. Waypoints
2
: The waypoints added by pressing the C2 Button on the remote controller. Tap to set the ight altitude,
heading, speed, gimbal angle and waypoint actions of each waypoint, switch among waypoints, and
delete the waypoint.
7. Route Settings | Save
Route Settings: Tap to enter the route settings menu to set task ending action, remote controller signal
loss action, aircraft heading in relevance to the ight route, cruising speed and route recording.
Other elements in this view are the same as the ones in Camera View.