User manual

Table Of Contents

Phantom 4 RTK User Manual

Planning View

Photogrammetry

Mapping Area Estimated Flight Time Photos/SD Card

Height(M)(GSD 2.74 cm/pixel)

100

Speed (M/s)

9.0

Finish

RETURN-TO-HOME

Camera Settings

Advanced Settings

Cancel

Save

1. Main Screen

: Tap this icon to return to the main screen.

2. Operation Type

Photogrammetry

: Shows the current type of operation being planned.

3. Planning Information

Shows the mapping area, estimated ight time, and number of photos.

4. More Settings

Tap

to enter the extended menu to view and adjust the parameters of all other settings. Refer to the

introduction for Camera View.

5. Location

: Tap to center the map around the aircraft’s location or the latest recorded Home Point.

6. Map Mode

: Tap to switch among Standard, Satellite, or Night modes.

7. Operation Parameters Settings

This settings list will pop-up after edge points added by tapping on the map.

Height: The altitude of the aircraft during the operation.

Speed: The ight speed during the operation. The preset ight speed cannot exceed the maximum speed

displayed above the Speed setting. The maximum speed is the ight speed at which images meeting

mapping requirements can be captured and is calculated by the app according to current settings.

Relative Altitude: The relative height between the takeoff point and the operation area. The actual

operation height is the aircraft height minus the relative height. NOTE: Make sure to set the correct

relative height to ensure the results contain appropriate overlap rates.

Finish: The aircraft action after the operation is completed. Choose from RTH, hovering, landing, and

back to the start point.

1 2 4