User manual

©
2020 DJI All Rights Reserved.
31
Phantom 4 RTK User Manual
01
Point the aircraft toward the screen
02
Align the boxes
03
Pan and tilt the aircraft
Calibrating Sensors
Vision Systems cameras installed on the aircraft are calibrated on delivery. However these cameras are
vulnerable to excessive impact and will require occasional calibration via DJI Assistant 2 for Phantom. Follow
the steps below to calibrate the sensors.
Using Vision Positioning
Vision Positioning is activated automatically when the aircraft is turned on. No further action is required. Vision
Positioning is typically used in indoor environments, where GNSS is unavailable. Using the sensors that are
built into the Vision System, the aircraft can hover precisely even without GNSS. The Downward Vision System
works best when the aircraft is at altitudes of under 33 ft (10 m). Operate the aircraft with great caution when
ying at high speeds at low altitudes (under 0.5 m).
Follow the steps below to use Vision Positioning:
1. Turn on the aircraft. The aircraft status indicator will ash green two times, which indicates the Vision Po-
sitioning is ready.
2. Gently push the left stick up to lift o and the aircraft will hover in place.