User manual

Aircraft
Phantom 4 User Manual
20
©
2017 DJI All Rights Reserved.
Exit TapFly
Use the following methods to exit TapFly:
1. Press once on the Intelligent Flight Pause button on the remote controller or pull back the pitch stick on
the remote controller.
2. Tap “STOP” button on the screen.
STOP
Aircraft will stop and hover after exit from TapFly. You may either tap a new target direction to proceed to
the next ight or bring back the aircraft to the Home Point manually.
ActiveTrack
ActiveTrack allows you to mark and track a moving object on your mobile device screen. The aircraft will
automatically avoid obstacles in its ight path.
Using ActiveTrack
Ensure the Intelligent Flight Battery has more than 50% power and the aircraft is in either P-mode. Then
follow the steps below to use ActiveTrack:
1. Take off and hover at least 9 feet (3 meters) above the ground.
3 meters
ON OFF
Auto Hold
2. In the DJI GO 4 app, tap to bring up the ight modes and then select.
ACTMETRACK SMART
OPTI OPTI
MENU
Safe to Fly (GPS)Safe to Fly (GPS)
TapFly SmartActiveTrack Normal
OR OR
Intelligent Flight Pause button