Quick Start

●
Before taking off, make sure the Aircraft Status Bar in the DJI GO app
indicates ‘Safe to Fly (GPS)’ or ‘Safe to fly (non-GPS)’ if flying indoors.
8. Flight
● Manual Takeoff and Landing (Stick configurations are for MODE 2)：
Safe to Fly
(
GPS
)
● Auto Takeoff and Landing:
Tap and slide to confirm automatic takeoff.
The aircraft will automatically takeoff and
hover at 4 feet (1.2 meters).
●
●
●
●
●
7. Getting Ready for Takeoff
Remove the gimbal clamp as shown on the right.
Place your Phantom 3 Advanced on a flat surface,
in an open space, with the nose facing away from
you. Then follow the steps below in this order:
...
B—B—...
Remote Controller Status LED Camera Controls
●
●
●
Your Phantom 3 Advanced can automatically takeoff and land at the tap of a button in the Camera screen of the DJI
GO app.
Tap and slide to confirm automatic landing.
The aircraft will automatically land.
●
●
●
●
●
Aircraft Status Indicators
2
High
Low
Battery Level
High
Low
Battery Level
●
● Return to Home:
ADVANCED
●
Tighten the propellers with both hands before each flight.
●
If you wish to record photos or videos, insert a Micro SD card into the Camera’s Micro SD Card Slot.
●
The Flight Mode Switch is locked in P Mode by default. Refer to the User Manual to learn how to unlock the switch and change
to other modes.
●
When not in P mode, the Phantom 3 Advanced will only maintain altitude, not position, and will drift with wind or user input. Return
to Home is not available in F mode.
●
For more information:
5
6
2
DJI GO
App
4
3
1
5
6
Toggle the Flight Mode Switch on your Remote Controller
to the right (P Mode). P Mode is Positioning Mode, A
Mode is ATTI Mode, and F Mode is Function Mode.
Turn on the Remote Controller by pressing the power
button once, releasing it, and then pressing and holding
for 2 seconds.
Insert the Intelligent Flight Battery into your Phantom 3
Advanced. Turn on the battery by pressing the power
button once, releasing it, and then pressing and holding
for 2 seconds.
Connect your mobile device to the Remote Controller
with a USB cable and launch the DJI GO app. Follow the
instructions within the app.
In the app, tap ‘Camera’. Ensure your Phantom 3
Advanced is ready to fly by completing the on-screen
Checklist. Beginner Mode is enabled by default when
you launch the DJI GO app for the first time. The
aircraft’s altitude and flight distance are restricted when
flying in Beginner Mode. You can disable Beginner
Mode in the Settings Page of the DJI GO app.
Attach the propellers with a black nut onto the motors with
black dot and spin them counter-clockwise to secure.
Attach the propellers with a grey nut onto the motors
without black dot and spin them clockwise to secure.
1