Quick Start

Manual Takeoff and Landing (Stick configurations are for MODE 2)
Auto Takeoff and Landing:
4. Charging the Batteries
Preparing Your Phantom 3 Advanced Before Flying
1. Download the DJI GO App
Search ‘DJI GO’ on the App Store or Google Play and
download the DJI GO app to your mobile device.
Only use the official DJI Phantom 3 Advanced charger. Remove the Intelligent Flight Battery from the aircraft before
charging.
It is recommended that you turn off the Intelligent Flight Battery or Remote Controller before charging.
Connect the charger to a suitable power source (100-240V 50/60Hz).
Connect the charger to the Intelligent Flight Battery or Remote Controller. The LEDs will display the current charge level,
and when fully charged, they will automatically turn off.
Watch the tutorial videos on
www.dji.com or in
the DJI GO app.
2. Watch the Tutorial Videos
...
B—B—...
Remote Controller Status LED Camera Controls
DJI GO app
Aircraft Status Indicators
2
High
Low
Battery Level
High
Low
Battery Level
B
A
B
A
Remove the Intelligent
Flight Battery
Return to Home:
ADVANCED
Read the User Manual and watch the video tutorials in the DJI GO app or on the official DJI website (www.dji.com), and
read the following documents included in the box before using your Phantom 3 Advanced for the first time:
Phantom 3
Advanced Quick Start Guide, Phantom 3 Safety Guidelines and Disclaimer, Phantom 3 Intelligent Flight Battery Safety Guidelines,
In the Box.
For the best experience, use a mobile device that runs iOS 8.0 or above or Android 4.1.2 or above.
3. Check Battery Levels
Pressing the Power Button once on either your Intelligent Flight Battery or Remote Controller displays the battery level.
Be sure to fully charge both batteries before your first flight.
Phantom 3 tutorial videos
For more information:
DJI GO
App