PHANTOM 3 ADVANCED Quick Start Guide V1.
Phantom 3 Advanced It’s time to meet your Phantom. The Phantom 3 Advanced’s camera records video at up to 1080p/60fps and captures 12 megapixel photos. Review the diagram below for a full list of your Phantom 3 Advanced’s parts: 8 7 6 9 4 3 5 2 1 10 1. Gimbal and Camera 9. Aircraft Status Indicators 2. Vision Positioning System 10. Antennas 3. Camera Micro SD Card Slot 11. Intelligent Flight Battery 4. Aircraft Micro USB Port 12. Power Button 5. Camera Status Indicator 13.
Remote Controller This powerful Remote Controller allows you to pilot and maneuver your Phantom 3 Advanced at distances over 16,400 feet (5 km)* away, while putting selected camera controls at your fingertips. Built into your Remote Controller is a rechargeable LiPo battery and DJI Lightbridge, which when paired with a compatible mobile device gives you a live HD view from the Phantom’s camera. 1. Power Button 2. Return to Home (RTH) Button 3. Control Sticks 4. Status LED 5. Battery Level LEDs 6.
Fly Safe DJI encourages you to enjoy flying your Phantom 3 Advanced in a safe, responsible, and smart way. To do this, it is important to understand some basic flight guidelines, both for your protection and for the safety of those around you. 1. Fly in Open Areas: Always fly in locations that are free and clear of buildings, trees, power lines, and other obstacles. Do not fly above or near people or animals. 2.
Appendix ● Aircraft Weight (Including Battery) Max Ascent Speed Max Descent Speed Max Speed Max Service Ceiling Above Sea Level Gimbal Controllable Range Video Recording Modes Max Bitrate of Video Storage Supported File Systems Photo Video Supported SD Card Types Operating Temperature Range Video Output Port Operating Temperature Range Battery Mobile Device Holder Transmitter Power (EIRP) Working Voltage Sony EXMOR 1/2.3” Effective pixels:12.4 M (total pixels: 12.
Preparing Your Phantom 3 Advanced Before Flying Read the User Manual and watch the video tutorials in the DJI GO app or on the official DJI website (www.dji.com), and read the following documents included in the box before using your Phantom 3 Advanced for the first time: Phantom 3 Advanced Quick Start Guide, Phantom 3 Safety Guidelines and Disclaimer, Phantom 3 Intelligent Flight Battery Safety Guidelines, In the Box. 1. Download the DJI GO App 2.
5. Preparing the Remote Controller Tilt the Mobile Device Holder to the desired position, and then adjust the antennas as shown. The strength of the Remote Controller’s signal will fluctuate depending on the positions of the antennas. Strong Weak The transmission signal between the aircraft and Remote Controller will be strongest within the range illustrated here. If the signal is weak, adjust the positions of the antennas and fly the aircraft closer to achieve optimal signal performance.
7. Getting Ready for Takeoff Remove the gimbal clamp as shown on the right. Place your Phantom 3 Advanced on a flat surface, in an open space, with the nose facing away from you. Then follow the steps below in this order: 2 1 1 Toggle the Flight Mode Switch on your Remote Controller to the right (P Mode). P Mode is Positioning Mode, A Mode is ATTI Mode, and F Mode is Function Mode. Turn on the Remote Controller by pressing the power button once, releasing it, and then pressing and holding for 2 seconds.
● Manual Takeoff and Landing (Stick configurations are for MODE 2): Start the motors by pulling both control sticks to the bottom inside (or outside) corners. Release the sticks once the motors start. Slowly push the left stick (throttle stick) up to takeoff. Start / Stop the motors To land, gently pull the left stick (throttle stick) down to lower the aircraft until it touches the ground. Then pull both sticks to the bottom inside corners to stop the motors.
PHANTOM 3 ADVANCED www.dji.