User manual

What to Do & Not to Do First
- Never, Never, Never, start flying Right Out of the Box OR after a Firmware Update!!!
You WILL Crash, Hit Something, Hurt Someone or Hurt Yourself!!
Too many times I’ve heard: “I just bought one, in 15 minutes I was flying and…crashing”. So PLEASE, people!
Did I say NEVER? I’m gonna say it again: N . E . V . E . R .!
- Start by reading the manuals. I know, it’s no fun but DO IT anyway, at least once…twice…and again!
- DJI Phantom Disclaimer
- DJI Phantom Quick Start Guide
- DJI Phantom User Manual
- This Guide 
- Watch LOTS of Tutorials/Demos/How-to’s Videos. Peruse the Quad’s forums like Phantom Pilots
, DJIGuys, RCgroups
and the new DJI forum
. Familiarize yourself with the Vision assistant software, the aircraft characteristics, the Naza-M
and IOC. Learn as much as you can. Be careful, some tutorials are missing some important steps or doing things the
wrong way (like calibrating near a car...come on tutorial makers!). Use your good judgment to make sure you
understand what to do and when/where to do it.
- Write your contact information on your Phantom (in case you lose it). Also, it might be very helpful to label your
Sticks\Switches. For already made stickers, have a look at this Phantom Identify Set
.
- Install the software from DJI Site/Apps Store (Check How-to’s Videos for more info)
1- On your PC/MAC:
- Drivers Assistant
- Phantom RC Assistant
- Phantom Vision Assistant
2- On your Smartphone:
- DJI Vision App
- Follow ALL the instructions from the “What to do After any Software/Firmware Update OR After a Crash” section.
Here are some good tutorials to watch and learn from:
- DJI Phantom Vision+ A Beginners How To Guide
- DJI Phantom 2, Radio Explained, Complete Tutorial
<- A very practical "before taking off" instructions guide!
- Zero to Airborne: 1st time DJI Phantom Pilot Tutorial
<- A very practical field guide for new pilots!
- DJI Phantom 2 Vision Plus Review | with Calibration, Footage and Ground Station Demo
- How to Use DJI Phantom Vision + Plus Assistant Software. Calibration, Setup, Change to Naza-M
- Switches & Mode Setup Tutorial
- DJI Phantom 2 Transmitter Calibration
Tutorial & Setup
- How to Calibrate DJI Phantom 2 Remote
Control and Gimbal
- Calibrating the IMU
- DJI Phantom 2 Vision The basics of Flying, Recording & Sharing
- DJI Phantom 2 - FIRMWARE Update, Quick Tutorial
- DJI FIRMWARE 3.08 - Official Guide - What's new?
- DJI Phantom 2 Vision/Vision+ - New Remote Control and Firmware 3.08 - Tutorial
- How to bind/rebind a transmitter / remote c
ontroller to your DJI Phantom, Vision+
- How to bind/rebind the range extender / cam
era on DJI Vision+ or Phantom Vision
Page 2