User Manual

©2012 DJI Innovations. All Rights Reserved. 9
Assistant Software
Software and Driver Installation
STEP1: Please download assistant software and driver from our website. Then decompress.
STEP2: Connect MC and PC via USB cable, power on MC.
STEP3: If operating system tries to install driver automatically, cancel it.
STEP4: Open folder DJI_USB_Driver, follow the Driver Installation Manual strictly to finish installation.
GUI
1 2 3 45 6 9
1011121413
7 8
15
1 TOOL
 Calibration: For gyroscope calibration and acceleration checking.
 Firmware upgrade: Always check for any updates of your firmware from Website, This will keep
your autopilot system up-to-date.
 Disable All Knob