OSMO Base Quick Start Guide V1.0 2016.
Disclaimer and Warning Congratulations on purchasing your new DJI product. The information in this document affects your safety and your legal rights and responsibilities. Read this entire document carefully to ensure proper configuration before use. Failure to read and follow instructions and warnings in this document may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity.
Specifications Dimensions: 126 mm × 90 mm × 44 mm Weight: 162 g Usage To mount, place the Osmo inside the slot with the lanyard hole facing the release button. Ensure it is secure. Release Button To remove the Osmo, hold down the release button. Be careful when mounting multiple accessories on the Osmo as this could cause the Osmo Base to topple over. Removing without holding down the release button may damage the Osmo.
The Osmo Base provides a 1/4” thread underneath for mounting on a tripod. 1/4” Thread Do not over tighten the 1/4" thread to avoid damaging the Osmo Base. The content in this document is subject to change. Download the latest version from www.dji.com/product/osmo If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. © 2016 DJI. All Rights Reserved.
