User Manual v1.0 2022.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search. Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section. Printing this Document This document supports high resolution printing.
Contents Using this Manual 2 Legend 2 Before Use 2 Downloading the DJI Mimo App 2 Introduction 4 Overview 4 Getting Started 5 Charging 5 Attaching the Phone 5 Using Osmo Mobile SE On-board Features Operating Mode DJI Mimo App 7 7 10 11 Connecting to the DJI Mimo App 12 Camera View 12 Firmware Update 16 How to Update 16 Storage 16 Specifications 17 © 2022 DJI All Rights Reserved.
Introduction Boasting 3-axis stabilization, the lightweight Osmo Mobile SE unlocks the full potential of your mobile phone. The foldable magnetic design makes setup easier than ever, transportation and storage more convenient. Osmo Mobile SE can be operated in both portrait and landscape, while the upright, underslung, side grip, and low position modes help capture the perfect shot. Take content to the next level through DJI Mimo with ActiveTrackTM 5.0, DynamicZoom, and Pano.
Getting Started Charging To charge Osmo Mobile SE, connect a USB adapter (not included) to the charging port using the power cable. The battery is fully charged when the battery level indicator turns off on the status panel. Charging time: approx. 2 hours and 12 minutes (tested in the environment temperature of 25° C when using a 10 W charger) Max runtime: approx. 8 hours (tested with the gimbal balanced and held steadily. This value should be taken as a reference only) Attaching the Phone 1.
Osmo Mobile SE User Manual 2. Align the marks on the phone clamp and the phone clamp mounting plate. Attach the mobile phone to Osmo Mobile SE. 3. Unfold the gimbal as shown. Press and hold the M button to power on. Osmo Mobile SE will stabilize once the gimbal mode indicator lights up on the status panel. 2 2s 1 Magnetic Phone Clamp Tips Make sure the direction of the magnetic phone clamp is the same as shown in the figure above.
Using Osmo Mobile SE On-board Features Status Panel Displays the System Status Indicator, Battery Level Indicator, and Gimbal Mode.
Osmo Mobile SE User Manual Zoom Slider Move the slider to the + direction to enlarge the subject and move the slider to the - direction to shrink. Push the slider once to change the zoom once. Push the slider continuously to change the zoom continuously. Joystick Move vertically and horizontally to tilt and pan the mobile phone. The joystick control direction can be set in DJI Mimo. Use the joystick to navigate through settings on the Quick Settings page.
Osmo Mobile SE User Manual M3×0.5 Screw Hole Used to mount counterweights. Counterweights should be used if a camera lens or microphone is mounted on the mobile phone. Make sure the total weight of these accessories is less than 290 g. Combination Operation Press the switch button, shutter/record button, and trigger simultaneously for more than one second to reset the Bluetooth name and connection and reconnect.
Osmo Mobile SE User Manual Operating Mode Operation modes apply when used in portrait and landscape mode. Upright Mode Underslung Mode Upright mode can be used without any further user input. In this mode, press the trigger twice quickly to center the mobile phone. Hold Osmo Mobile SE upside down to enter Underslung mode, in which the mobile phone can easily capture images from a lower position. Press the trigger twice to center the mobile phone.
DJI Mimo App Watch a live HD video feed on your mobile phone screen through the DJI Mimo app. The app also allows you to use ShotGuides, Story mode, Hyperlapse, Timelapse, ActiveTrack 5.0, DynamicZoom, and Pano, or configure camera and gimbal settings in just a few taps. Device: tap to connect to Osmo Mobile SE. Once connected, DJI Mimo enters camera view. Academy: tap to watch tutorials and view manuals. Scan the QR code on the gimbal to access Academy directly.
Osmo Mobile SE User Manual Connecting to the DJI Mimo App 1. Power on Osmo Mobile SE. 2. Enable Bluetooth on the mobile phone and connect to the device with an OMSE prefix name in DJI Mimo. 3. Users are required to allow access to certain information when using DJI Mimo for the first time. The exact information will be listed in the prompt. An internet connection is required. Osmo Mobile SE will be activated after authorization and the app will enter the camera view.
Osmo Mobile SE User Manual There are three ways to use ActiveTrack 5.0: a. Drag a box on the screen in the camera view in DJI Mimo. A green box around the subject indicates ActiveTrack 5.0 is successfully enabled. Tap the icon on the top corner to stop tracking. b. Enable Gesture Control , select “Follow and Shoot” in DJI Mimo, and perform a palm or V gesture for one to two seconds when facing the camera. The gimbal will follow the subject closest to the camera.
Osmo Mobile SE User Manual DynamicZoom: choose from Move Out and Move In mode. After selecting a mode, drag a box to select a subject, and tap the shutter button to start shooting. Slow Motion: tap to shoot video at 4x and 8x slow motion. Check the mobile phone compatibility list for more information. Video: tap to shoot a normal video. Photos: tap to take a single shot photo. Press and hold for burst shooting. Pano: tap to take a 3×3, 240°, or CloneMe panorama photo.
Osmo Mobile SE User Manual the gimbal to be controlled in a horizontal or vertical direction. Invert Joystick: after enabling this feature, the gimbal movement direction is inverted. Select from Off, Horizontal, Vertical, and All. After enabling Horizontal, the pan axis movement direction is inverted. After enabling Vertical, the tilt axis movement direction is inverted. Sound: the sound of the gimbal can be turned on/off.
Firmware Update Use DJI Mimo to update the Osmo Mobile SE firmware. It takes approximately three minutes to complete an update. How to Update Before starting an update, make sure that the battery level indicator shows green or yellow. Connect Osmo Mobile SE to your mobile device and launch DJI Mimo. You will be prompted if a new firmware update is available. To start updating, connect the mobile device to the internet and follow the on-screen instructions. Do not exit DJI Mimo while updating the firmware.
Specifications General Unfolded: 262.5×104×119.5 mm (L×W×H) Folded: 167×108.5×46.5 mm (L×W×H) Gimbal: Approx. 352 g Weight Magnetic Phone Clamp: Approx. 31 g Compatible Phone Weight 170-290 g Compatible Phone Thickness 6.9-10 mm Compatible Phone Width 67-84 mm Battery Type 18650 Li-ion Chemical System LiNiMnCoO2 Capacity 2600 mAh Energy 9.36 Wh Voltage 2.75-4.2 V Charging Temperature 5° to 40° C (41° to 104° F) Operating Temperature 0° to 40° C (32° to 104° F) Approx.
WE ARE HERE FOR YOU Contact DJI SUPPORT https://www.dji.com/osmo-mobile-se/downloads If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. Copyright © 2022 DJI All Rights Reserved.
