User Guide
EN
3
Safety Guidelines
1. The Osmo Action Charging Hub is only compatible with
the supported battery adapters. Refer to the Specications
section for a list of supported battery adapters.
2. The Osmo Action Charging Hub is only compatible with
AB1-1300mAh-3.85V batteries. DO NOT use the charging
hub with other battery models.
3. Place the Osmo Action Charging Hub on a at and stable
surface when in use. Make sure the device is properly
insulated to prevent re hazards.
4. DO NOT touch the metal terminals on the charging hub.
5. Clean the metal terminals with a clean, dry cloth if there is
any noticeable buildup.
6. If the battery falls into water, put it in a safe and open area
immediately. Maintain a safe distance from the battery until
it is completely dry. DO NOT use the battery again, and
properly dispose of the battery as described in point 30.
7. Put out a battery re using water, sand, a re blanket, or
a dry powder re extinguisher.
8. DO NOT use a non-DJI OSMO battery. DJI OSMO takes
no responsibility for any damage caused by a non-DJI
OSMO battery. Purchase a new battery at www.dji.com.
9. DO NOT use or charge swollen, leaky, or damaged battery.
10. The battery should be used in a temperature range from
14° to 104° F (-10° to 40° C). Use of the battery in an
environment above 104° F (40° C) can lead to a fire or
explosion. Use of the battery below 14° F (-10° C) can lead
to permanent damage.
11. DO NOT use the battery in a strong electrostatic or
electromagnetic environment.
12. DO NOT disassemble or pierce the battery in any way.
Otherwise, the battery may leak, catch re, or explode.
13. DO NOT drop or strike the battery. DO NOT place heavy
objects on the battery or charger.