Manual

In The Box

Main Controller (MC) ×1

The Main Controller (MC) is the brain of the system, it communicates with all

ESCs and RC transmitter to carry out the autopilot functionality. It has a built-

in Inertial Measurement Unit (IMU) consists of one 3-axis accelerometer, one

3-axis gyroscope and a barometer for sensing the attitude and altitude.

Versatile Unit (VU) ×1

Specially designed for NAZA-M LITE. It solves the high power consumption

problem of multi-rotor system, supply and monitor power for NAZA-M LITE

and other electronic devices. It also has an LED to indicate different

operating states of NAZA-M LITE and a USB interface for configuring the

NAZA-M LITE unit and firmware upgrade.

Optional GPS & Compass Module ×1

The GPS/Compass module is for sensing the position and direction.

Optional GPS Bracket ×1

Because the GPS & Compass are sensitive to magnetic interference, you should use this bracket to mount the

GPS module.

USB Cable ×1

This cable is used to configure MC and upgrade firmware.

3-PIN Servo Cable ×8

Cables used to connect the MC and the receiver.

3M Gummed Paper ×4

Used for fixing NAZA-M LITE components on multi-rotor’s frame.