User manual
©
2022 DJI All Rights Reserved.
39
Remote Controller
DJI RC
When used with DJI Mini 3 Pro, DJI RC remote controller features OcuSync O3 video transmission,
works at both 2.4 GHz and 5.8 GHz frequency bands. It is capable of selecting the best transmission
channel automatically and can transmit 1080p 30fps HD live view from the aircraft to the remote
controller at a distance of up to 12 km (7.5 mi) (compliant with FCC standards, and measured in
a wide open area without interference). The DJI RC is also equipped with a 5.5-in touchscreen
(1920×1080 pixel resolution) and a wide range of controls and customizable buttons, enabling
users to easily control the aircraft and remotely change the aircraft settings. The built-in 5200 mAh
battery with a power of 18.72 Wh provides the remote controller with a maximum operating time of
four hours. The DJI RC comes with many other functions such as Wi-Fi connection, built-in GNSS
(GPS+Beidou+Galileo), Bluetooth, built-in speakers, detachable control sticks, and microSD storage.
Compliance Version: The remote controller is compliant with local regulations.
Control Stick Mode: The control stick mode determines the function of each control stick movement.
Three pre-programmed modes (Mode 1, Mode 2, and Mode 3) are available and custom modes can
be congured in DJI Fly. The default mode is Mode 2.
Using the Remote Controller
Powering On/O
Press the power button once to check the current battery level.
Press once then press again and hold to power the remote controller on or o.
Controlling the Gimbal and Camera
Focus/Shutter Button: Press halfway down to auto-focus and press all the way down to take a photo.
Charging the Battery
Use a USB-C cable to connect a USB charger to the USB-C port of the remote controller. The battery
can be fully charged in about 1 hour and 30 minutes with a maximum charging power of 15 W (5V/3A).
It is recommended to use a USB Power Delivery charger.