Manual

8
©
2023 DJI All Rights Reserved.
DJI Mini 3 Pro
User Manual
2. The remote controller needs to be activated before rst use and an internet connection is required for
activation. Press, and then press again and hold the power button to power on the remote controller.
Follow the on-screen prompts to activate the remote controller.
Follow the steps below to prepare the DJI RC-N1 remote controller.
1. Remove the control sticks from the storage slots and mount them on the remote controller.
2. Pull out the mobile device holder. Choose the appropriate remote controller cable based on the port
type of your mobile device (a Lightning connector cable, Micro USB cable, and USB-C cable are
included in the packaging). Place your mobile device in the holder, then connect the end of the cable
without the remote controller logo to your mobile device. Make sure your mobile device is securely in
place.
1
2
1
2
If a USB connection prompt appears when an Android mobile device is used, select the option to
charge only. Other options may cause the connection to fail.
Activating the DJI Mini 3 Pro Aircraft
DJI Mini 3 Pro requires activation before rst use. After powering on the aircraft and remote controller,
follow the on-screen prompts to activate DJI Mini 3 Pro using DJI Fly. An internet connection is required
for activation.
Preparing the Remote Controller
Follow the steps below to prepare the DJI RC remote controller.
1. Remove the control sticks from the storage slots and mount them on the remote controller.