Manual
72
©
2023 DJI All Rights Reserved.
DJI Mini 3 Pro
User Manual
a) When in standby mode on the ground: about 22 minutes;
b) When updating rmware: about 19 minutes (sucient for 3 times of upgrades);
c) When using QuickTransfer immediately after powering on: about 35 minutes;
d) When using QuickTransfer after landing: about 35 minutes;
Firmware Update
Use DJI Fly or DJI Assistant 2 (Consumer Drones Series) to update the aircraft and the remote controller
rmware.
Using DJI Fly
When connecting the aircraft or remote controller to DJI Fly, you will be notied if a new rmware update
is available. To start updating, connect your remote controller or mobile device to the internet and follow
the on-screen instructions. Note that you cannot update the rmware if the remote controller is not
linked to the aircraft. An internet connection is required.
Using DJI Assistant 2 (Consumer Drones Series)
Update the aircraft and remote controller rmware separately using DJI Assistant 2 (Consumer Drones
Series).
Follow the instructions below to update the aircraft rmware:
1. Launch DJI Assistant 2 (Consumer Drones Series) on your computer and log in with your DJI
account.
2. Power on the aircraft and connect the aircraft to the computer via the USB-C port within 20
seconds.
3. Select DJI Mini 3 Pro and click Firmware Updates.
4. Select the rmware version.
5. Wait for the rmware to download. The rmware update will start automatically.
6. Wait for the rmware update to complete.
Follow the instructions below to update the remote controller rmware:
1. Launch DJI Assistant 2 (Consumer Drones Series) on your computer and log in with your DJI
account.
2. Power on the remote controller and connect it to the computer via the USB-C port.
3. Select the corresponding remote controller and click Firmware Updates.
4. Select the rmware version.
5. Wait for the rmware to download. The rmware update will start automatically.
6. Wait for the rmware update to complete.