Manual

©
2023 DJI All Rights Reserved.
51
DJI Mini 3 Pro
User Manual
Optimal Transmission Zone
The signal between the aircraft and the remote controller is most reliable when the remote controller is
positioned towards the aircraft as depicted below.
Linking the Remote Controller
The remote controller is already linked to the aircraft when purchased together as a combo. Otherwise,
follow the steps below to link the remote controller and the aircraft after activation.
1. Power on the aircraft and the remote controller.
2. Launch DJI Fly.
3. In camera view, tap and select Control and then Pair to Aircraft (Link).
4. Press and hold the power button of the aircraft for more than four seconds. The aircraft will beep
once when it is ready to link. After the linking is successful, the aircraft will beep twice and the battery
level LEDs of the remote controller will appear on and solid.
Make sure the remote controller is within 0.5 m of the aircraft during the linking.
The remote controller will automatically unlink from an aircraft if a new remote controller is linked to
the same aircraft.
Turn o Bluetooth and Wi-Fi of the mobile device for optimal video transmission.
Fully charge the remote controller before each ight. The remote controller sounds an alert when the
battery level is low.
If the remote controller is powered on and not in use for ve minutes, an alert will sound. After six
minutes, the remote controller automatically powers o. Move the control sticks or press any button
to cancel the alert.
Adjust the mobile device holder to make sure your mobile device is secure.
Fully charge the battery at least once every three months to maintain the battery’s health.
Weak Signal
Optimal Transmission Zone